Guangxi - Nanning - Chongzuo - Pingxiang - guest - Hezhou - Bose - Qinzhou - North Sea - Yulin - Fangchenggang - Guilin - Wuzhou - Liuzhou - Hechi - Guigang Nanning filter bags - Electroplating filter bags Nanning - Nanning glue filter bags - Guangzhou Patrizi Company factory direct liquid filter bags are welcome to inquire, Huang Yueming: 15889478332 Patrizi professional production of filter bags | liquid filter bags | paint filter bags | Chemical filter bags | grease filter bags | paint filter bags | PP filter bag | PE filter bags | MO filter bags | plating filter bag | oil filter bag | oil removal filter bags | suction filter bags | ink filter bags | seam filter bags using a three-dimensional depth filter material, 100% pure fiber to acupuncture formed three-dimensional, highly fluffy three-dimensional depth twists and turns of the filter layer. Which is characterized by loose fibrous tissue, the high rate of increase in the load capacity of impurities, the kinds of fiber materials are of the double shut-off mode, the effective removal of solid and soft particles, ie larger particles of impurities are trapped in the fiber surface, and subtle particles were captured in the deep filter, be sure to use the process will not damaged due to the pressure increase, and therefore has a high filtration efficiency, in addition to high-temperature surface heat treatment, the application instantly sintering technology / calendering treatment, which can effectively prevent the filter When the fiber by the liquid high-speed impact and loss, both to ensure no fibers from the resulting filtrate contamination phenomenon, but also to avoid the traditional roll treatment caused pore blockage and reduced bag life, while small and do not affect the pressure flow rate. Material: polyester (PE), polypropylene (PP), nylon (MO) Filtration accuracy (micron um): 1,3,5,10,15,20,25,50,75,100,150,200 Operating temperature (℃): polyester (PE) 130 (instant 180), polypropylene (PO) 90 (instantaneous 110), nylon (MO) 180 filter bags fixed orifice ring material: stainless steel ring, galvanized steel ring, plastic ring (polyester / PP) production methods: Five seams, full fusion welding standard filter bag sizes: the 1st bag -Φ180 × 430mm (Φ7 × 17 inches) on the 2nd bag -Φ180 × 820mm (Φ7 × 32 inches) on the 3rd bag - Φ106 × 230mm (Φ4 × 9 inches) on the 4th bag -Φ106 × 380mm (Φ4 × 15 inches) on the 5th pocket -Φ152 × 510mm (Φ6 × 20 inches) in addition to standard products, the company also based on customer requirements for a variety of different liquid filter bags, air filter bag series. A warm welcome to inquire.